The local velocity is determined at a specific location in the flow stress using a Pitot tube. A copper/SS Pitot tube of standard design is provided and mounted below the Vernier scale. The position of the Pitot tube in a clear pipe segment can be measured using the Vernier scale. A flow control valve is installed in the pipe to manage the flow. The velocity head is measured using a U-tube manometer that is offered. Present A sump tank, a centrifugal pump, and other features are included in the setup, which is a self-contained water recirculation machine. In the water pipe, flow control and bypass valves are installed to allow for the experiment's various flow rates. A measuring tank and stopwatch are used to determine the water flow rate.

Experimental objectives

• To find the point velocity at the center of a tube for different flow rates of water and calibrate the Pitot tube 
• To plot velocity profile across the cross section of pipe

Specifications

• Pilot Tube Material Copper/SS of compatible size fitted with Vernier Scale
• Test Section Material Clear Acrylic, Compatible to 1” Dia. Pipe
• Water Circulation FHP Pump, Crompton / Sharp make
• Flow Measurement Using Measuring Tank, Capacity 40 Ltrs.
• Sump Tank Capacity 70 Ltrs.
• Stop Watch Electronic
• Control Panel On / Off Switch, Mains Indicator etc.

Required Other Items but not Included with above supply

• Water Supply & Drain
• Electricity Supply: Single Phase, 220 VAC, 0.5 kW